In the study of Hohenlohe et al. 2010, a genome scan of nucleotide diversity and differentiation in natural populations of threespine stickleback Gasterosteus aculeatus was conducted. Authors used Illumina-sequenced RAD tags to identify and type over 45,000 single nucleotide polymorphisms (SNPs) in each of 100 individuals from two oceanic and three freshwater populations.

We here proposed to re-analyze these data at least until the population genomics statistics calculation step using STACKS pipeline. Gasterosteus aculeatus draft genome will be used here as reference genome. In a reference-based RAD-seq data analysis, the reads are aligned (or mapped) against a reference genome to constrain our analysis to focus on already discovered loci. A de-novo approach can also be conducted (see de_novo tutorial, enhancing discoverability of new loci of interest but also of false positive one).

Agenda

In this tutorial, we will deal with:

1. Pretreatments
   1. Data upload
   2. Demultiplexing reads
   3. Quality control
2. Mapping
3. SNP calling from radtags
4. Calculate population genomics statistics
5. Conclusion

Pretreatments

Data upload

The original data is available at NCBI SRA ENA under accession number SRR034310 as part of the NCBI SRA ENA study accession number SRP001747.

We will look at the first run SRR034310 out of seven which includes 16 samples from 2 populations, 8 from Bear Paw (freshwater) and 8 from Rabbit Slough (oceanic). We will download the reads directly from SRA and the remaining data (i.e reference genome, population map file, and barcodes file) from Zenodo.

Hands-on: Data upload

1. Create a new history for this RAD-seq exercise. If you are not inspired, you can name it “STACKS RAD: population genomics with reference genome” for example…

   Tip: Creating a new history

   To create a new history simply click the new-history icon at the top of the history panel:

   

2. EBI SRA tool import files from SRA:
   • Search for SRR034310
   • Under results for Run, click on view all 1 result
   • In the next menu, click on the result SRR034310
   • In the table at the bottom, click the link in the column FASTQ files (Galaxy)

   This will redirect to the Galaxy website and start the download.

3. Upload remaining training data from Zenodo:

   https://zenodo.org/record/1134547/files/Barcode_SRR034310.txt
   https://zenodo.org/record/1134547/files/Details_Barcode_Population_SRR034310.txt
   https://zenodo.org/record/1134547/files/Reference_genome_11_chromosomes.fasta
   

   Tip: Importing via links

   • Copy the link location

   • Click galaxy-upload Upload Data at the top of the tool panel

   • Select galaxy-wf-edit Paste/Fetch Data

   • Paste the link(s) into the text field

   • Press Start

   • Close the window

4. Make sure the fastq.gz files you imported are of datatype fastqsanger.gz

   Tip: Changing the datatype

   • Click on the galaxy-pencil pencil icon for the dataset to edit its attributes
   • In the central panel, click galaxy-chart-select-data Datatypes tab on the top
   • In the galaxy-chart-select-data Assign Datatype, select fastqsanger.gz from “New type” dropdown
     • Tip: you can start typing the datatype into the field to filter the dropdown menu
   • Click the Save button

   Next, we need to tell Galaxy about the reference genome associated with this.

5. We will define a custom reference build** for this tutorial:

   Tip: Adding a custom database/build (dbkey)

   • Navigate to the History that contains your fasta for the reference genome
   • Standarize the fasta format
   • In the top menu bar, go to User -> Preferences -> Manage Custom Builds
   • Create a unique Name for your reference build Stickleback
   • Create a unique Database (dbkey) for your reference build stickleback
   • Under Definition, select the option FASTA-file from history
   • Under FASTA-file, select your fasta file Reference_genome_11_chromosomes.fasta
   • Click the Save button

6. Next, we set the dbkey of our imported fastq files to our custom build key

   Tip: Changing database/build (dbkey)

   • Click the desired dataset’s name to expand it.

   • Click on the “?” next to database indicator:

     

   • In the central panel, change the Database/Build field
   • Select your desired database key from the dropdown list: stickleback
   • Click the Save button

7. Rename datasets according to the sample names

The sequences are raw sequences from the sequencing machine, without any pretreatments. They need to be demultiplexed. To do so, we can use the Process Radtags tool from STACKS.

Demultiplexing reads

For demultiplexing, we use the Process Radtags tool from STACKS.

Hands-on: Demultiplexing reads

1. Process Radtags tool with the following parameters:
   • “Single-end or paired-end reads files”: Single-end files
     • “Singles-end reads infile(s)”: SRR034310.fastq(.gz)
   • “Barcode file”: Barcodes_SRR034310.tabular
   • “Number of enzymes”: One
   • “Enzyme”: sbfI
   • “Capture discarded reads to a file”: Yes
   • “Output format”: fastq

   Question

   1. How many reads where on the original dataset?
   2. How many are kept?
   3. Can you try to explain the reason why we loose a lot of reads here?
   4. What kind of information does this result give concerning the upcoming data analysis and the barcodes design in general?

   Solution

   The informations can be found in the results log file:

   1. 8895289 total reads
   2. 8139531 retained reads
   3. There are no sequences filtered because of low quality. This is because radtags didn’t apply quality related filtering since the corresponding advanced option (Discard reads with low quality scores) has not been enabled. So here, all not retained sequences are removed because of an ambiguous barcode (626265) or an ambiguous RAD-Tag (129493). This means that some barcodes are not exactly what was specified on the barcode file and that sometimes, no SbfI restriction enzyme site was found. This can be due to some sequencing problems but here, this is also due to the addition, in the original sequencing library, of RAD-seq samples from another study. This strategy is often used to avoid having too much sequences beginning with the exact same nucleotide sequence which may cause Illumina related issues during sequencing and cluster analysis
   4. Sequencing quality is essential! Each time your sequencing quality decreases, you loose data and thus essential biological information!

   In addition to the overall statistics the numbers of retained and removed reads are also given for each barcode sequence.

2. Process Radtags tool: Re-Run playing with parameters
   • Section Advanced
     • “Discard reads with low quality scores”: Yes
     • “score limit”: 20 (for example; play with this)
     • “Set the size of the sliding window as a fraction of the read length, between 0 and 1”: 0.30 (for example; play with this)

This sliding window parameter allows notably the user to deal with the declining quality at the 3’ end of reads.

Hands-on

You can use the Charts functionality through the Visualize button reachable on the Radtags logs file you just generated.

If like me you don’t have payed attention to the organization of you file for the graphical representation you obtain a non optimal bars diagram with a not intelligent X-axis ordering. There is a lot of different manner to fix this. You can use a copy/paste “bidouille” or you can use Galaxy tools to manipulate the radtags logs file to generate a better graph. For example, you can use Select lines that match an expression tool to select rows then use the Concatenate datasets tail-to-head tool to reorganize these lines in a new file. Then we generate a graphical display of the changes:

First we cut the interesting lines of each result.log with Stacks: process radtags

1. Select lines that match an expression applying ^R1.fq.gz on the log files and then
2. Replace Text in entire line on the resulting data sets finding R1.fq.gz and replacing with NoScoreLimit or Score10 or Score20 depending of the case
3. Select lines that match an expression applying File\tRetained Reads on one of the log file to obtain you futur header
4. Replace Text in entire line on the resulting data set finding File and replacing with # to have a best display
5. Concatenate datasets tail-to-head on the resulting data sets stating from the header you just created
6. Finally Convert delimiters to TAB on the resulting data set converting all Tabs to be sure having a well formatted tabular file at the end

Alternatively just copy/paste these lines on the Galaxy upload tool using Paste/fetch data section and modifying the File header by sample and filename by Score 10 / Score 20 and Lowquality for example… Before Starting the upload, you can select the Convert spaces to tabs option through the Upload configuration wheel. If you did not pay attention to the order you can just sort the file using the first column.

And you obtain a file like this one, ready to generate a beautiful and smart bar stacked!

#		Retained Reads	Low Quality	Ambiguous Barcodes	Ambiguous RAD-Tag	Total
NoScoreLimit	8139531		0		626265			129493			8895289
Score10		7373160		766371		626265			129493			8895289
Score20		2980543		5158988		626265			129493			8895289

You can use the Charts functionality through the Visualize button to plot the data.

You can further test using a filter like clean data, remove any read with an uncalled base and see that here, this has only little impact on the number of retained reads.

The demultiplexed sequences are raw sequences from the sequencing machine, without any pretreatments. They need to be controlled for their quality.

We propose to continue the tutorial using the dataset collection containing the demultiplexed reads obtained with Process Radtag execution made with a quality score of 10 and with the Discard reads with low quality scores parameter set to Yes (so containing 7373160 retained reads).

Quality control

For quality control, we use similar tools as described in NGS-QC tutorial: FastQC.

Hands-on: Quality control

1. FastQC tool to check the quality of the reads:
   • param-collection “Short read data from your current history”: the fastq files (collection)

   Question

   1. What is the read length?

   Solution

   The read length is 32 bp

2. MultiQC tool with the following parameters:
   • “Which tool was used generate logs?”: FastQC
   • “Type of FastQC output?”: raw data
   • param-collection “FASTQC output”: the raw data output of FastQC (collection)

Note the quality drop at bases 5-10 which are the cut site of the RADSeq protocol (TGCAGG). This is caused by the extremely uneven distribution the sequencer observes TGCAGG in lockstep on all spots/clusters, i.e. all clusters light up at the same time. Therefore the sequencer can not be sure that each spot/cluster is correct which is expressed by the lower quality score. Usually, to reduce this problem, PhiX is added, OR, as it is the case here, samples with heterogeneous barcodes lengths are mixed. Still, approximately ~99% of the cases match nucleotide expected for the cut site sequence.

As there is a draft genome for Gasterosteus aculeatus, we can use this information and map the sequences on this genome to identify polymorphism.

Mapping

To make sense of the reads, their positions within Gasterosteus aculeatus genome must be determined. This process is known as aligning or ‘mapping’ the reads to the reference genome.

Comment

Do you want to learn more about the principles behind mapping? Follow our training

Here we will use BWA. BWA is a fast light-weighted tool that aligns relatively short sequences (queries) to a sequence database (large), such as the human reference genome. It is developed by Heng Li at the Sanger Institute.

Li et Durbin, Bioinformatics, 2009

Hands-on: Map with BWA

1. Map with BWA - map short reads (< 100 bp) against reference genome tool with the following parameters:
   • “Will you select a reference genome from your history or use a built-in index?”: Use a genome from history and build index
   • “Use the following dataset as the reference sequence”: Reference_genome_11_chromosomes.fasta
   • “Select input type”: Single Fastq
   • “Select fastq dataset”: One dataset collection containing the demultiplexed reads obtained with Process Radtag execution made with a quality score of 10 and with the Discard reads with low quality scores parameter set to Yes (so containing 7373160 retained reads).

BWA generates BAM files with the mapped reads.

We next want to run Stacks on the freshwater and oceanic populations.

SNP calling from radtags

Run Stacks: Reference map Galaxy tool. This program will run pstacks, cstacks, and sstacks using a perl scrip (ref_map.pl) on the members of the population, accounting for the alignments of each read.

Comment

Information on ref_map.pl and its parameters can be found online: https://creskolab.uoregon.edu/stacks/comp/ref_map.php.

Hands-on: Stacks: Reference map

1. Create a new file with our population map and name it Population_map.txt:

   sample_CCCC	1
   sample_CCAA	1
   sample_CCTT	1
   sample_CCGG	1
   sample_CACA	1
   sample_CAAC	1
   sample_CATG	1
   sample_CAGT	1
   sample_CTCT	2
   sample_CTAG	2
   sample_CTTC	2
   sample_CTGA	2
   sample_GGGG	2
   sample_GGAA	2
   sample_GGTT	2
   sample_GGCC	2
   

   Tip: Creating a new file

   • Click galaxy-upload Upload Data at the top of the tool panel
   • Select galaxy-wf-edit Paste/Fetch Data at the bottom
   • Paste the file contents into the text field
   • Press Start and Close the window

2. Stacks: Reference map tool:

   • “Select your usage”: Population
   • “Files containing an individual sample from a population”: Choose the mapped reads (data collection)
   • “pecify a population map”: Population_map.txt created above
   • “Minimum depth of coverage”: 3

   Comment

   If you are using a file presenting population information and individual name in a different manner than expected by STACKS, you can use Galaxy tools like Replace Text (for example to replace Rabbit Slough by a population number like 2, Add column (for example to add sample_) or Cut columns from a table (to put the new sample_ column af the first place) and finally Regex replace (replacing (sample_)\t by \1) to generate it…

Once Stacks has completed running, investigate the output files: ref_map.log, Summary from Stacks: reference map on data... and Catalog (*) (snps, alleles and tags). Notice that each locus now has a chromosome/base pair specified in each of the *tags.tsv files and in the catalog files.

Calculate population genomics statistics

Hands-on: Calculate population genomics statistics

1. Stacks: populations tool with the following parameters:
   • “Input type”: Stacks output
   • “Output from previous Stacks pipeline steps (e.g. denovo_map or refmap)”: Full output from ref_map
   • “Specify a population map”: Population_map.txt
   • Section Data filtering options
     • “Minimum percentage of individuals in a population required to process a locus for that population”: 0.75
   • Section Output options (VCF and Structure) and enabling SNP and haplotype-based F statistics calculation.
     • “Output results in Variant Call Format (VCF)”: Yes
     • “Output results in Structure Format”: Yes
   • “Enable SNP and haplotype-based F statistics”: Yes
2. Now look at the output in the file batch_1.sumstats named SNP and Haplotype-based F statistics with Stacks: populations ... on your history. This file is also reachable on the data collection nammed Full output from ref_map ..... with his original name batch_1.sumstats. There are a large number of statistics calculated at each SNP, so use Galaxy tools like filter, cut, and sort to focus on some.

Question

1. What is the maximum value of FST’ at any SNP? Don’t hesitate to look at the STACKS manual to find where this parameter is
2. What is the meaning of this FST’ value compared a a classical FST one? Once again, the STACKS manual can help you ;)
3. How many SNPs reach this FST’ value?

Solution

1. 1
2. FST’ is a haplotype measure of FST that is scaled to the theoretical maximum FST value at this locus. Depending on how many haplotypes there are, it may not be possible to reach an FST of 1, so this method will scale the value to 1
3. 78

You can now for example filter this dataset to only keep FST’=1 loci for further analysis…

Conclusion

In this tutorial, we have analyzed real RAD sequencing data to extract useful information, such as which loci are candidate regarding the genetic differentiation between freshwater and oceanic Stickelback populations. To answer these questions, we analyzed RAD sequence datasets using a reference-based RAD-seq data analysis approach. This approach can be sum up with the following scheme:

You've Finished the Tutorial

Please also consider filling out the Feedback Form as well!

Frequently Asked Questions

Useful literature

Further information, including links to documentation and original publications, regarding the tools, analysis techniques and the interpretation of results described in this tutorial can be found here.

Feedback

Did you use this material as an instructor? Feel free to give us feedback on how it went.
Did you use this material as a learner or student? Click the form below to leave feedback.

Citing this Tutorial

1. Yvan Le Bras, RAD-Seq Reference-based data analysis (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/ecology/tutorials/ref-based-rad-seq/tutorial.html Online; accessed TODAY
2. Hiltemann, Saskia, Rasche, Helena et al., 2023 Galaxy Training: A Powerful Framework for Teaching! PLOS Computational Biology 10.1371/journal.pcbi.1010752
3. Batut et al., 2018 Community-Driven Data Analysis Training for Biology Cell Systems 10.1016/j.cels.2018.05.012

BibTeX

@misc{ecology-ref-based-rad-seq,
author = "Yvan Le Bras",
	title = "RAD-Seq Reference-based data analysis (Galaxy Training Materials)",
	year = "",
	month = "",
	day = "",
	url = "\url{https://training.galaxyproject.org/training-material/topics/ecology/tutorials/ref-based-rad-seq/tutorial.html}",
	note = "[Online; accessed TODAY]"
}
@article{Hiltemann_2023,
	doi = {10.1371/journal.pcbi.1010752},
	url = {https://doi.org/10.1371%2Fjournal.pcbi.1010752},
	year = 2023,
	month = {jan},
	publisher = {Public Library of Science ({PLoS})},
	volume = {19},
	number = {1},
	pages = {e1010752},
	author = {Saskia Hiltemann and Helena Rasche and Simon Gladman and Hans-Rudolf Hotz and Delphine Larivi{\`{e}}re and Daniel Blankenberg and Pratik D. Jagtap and Thomas Wollmann and Anthony Bretaudeau and Nadia Gou{\'{e}} and Timothy J. Griffin and Coline Royaux and Yvan Le Bras and Subina Mehta and Anna Syme and Frederik Coppens and Bert Droesbeke and Nicola Soranzo and Wendi Bacon and Fotis Psomopoulos and Crist{\'{o}}bal Gallardo-Alba and John Davis and Melanie Christine Föll and Matthias Fahrner and Maria A. Doyle and Beatriz Serrano-Solano and Anne Claire Fouilloux and Peter van Heusden and Wolfgang Maier and Dave Clements and Florian Heyl and Björn Grüning and B{\'{e}}r{\'{e}}nice Batut and},
	editor = {Francis Ouellette},
	title = {Galaxy Training: A powerful framework for teaching!},
	journal = {PLoS Comput Biol}
}

                   

Galaxy Administrators: Install the missing tools

You can use Ephemeris's shed-tools install command to install the tools used in this tutorial.

shed-tools install [-g GALAXY] [-a API_KEY] -t <(curl https://training.galaxyproject.org/training-material/api/topics/ecology/tutorials/ref-based-rad-seq/tutorial.json | jq .admin_install_yaml -r)

Alternatively you can copy and paste the following YAML

---
install_tool_dependencies: true
install_repository_dependencies: true
install_resolver_dependencies: true
tools:
- name: text_processing
  owner: bgruening
  revisions: 74a8bef53a00
  tool_panel_section_label: Text Manipulation
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: text_processing
  owner: bgruening
  revisions: d698c222f354
  tool_panel_section_label: Text Manipulation
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: bwa
  owner: devteam
  revisions: 64f11cf59c6e
  tool_panel_section_label: Mapping
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: bwa_wrappers
  owner: devteam
  revisions: b4427dbb6ced
  tool_panel_section_label: Mapping
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: fastqc
  owner: devteam
  revisions: ff9530579d1f
  tool_panel_section_label: FASTA/FASTQ
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: multiqc
  owner: iuc
  revisions: 1c2db0054039
  tool_panel_section_label: Quality Control
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: stacks_populations
  owner: iuc
  revisions: 45db1ba16163
  tool_panel_section_label: RAD-seq
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: stacks_procrad
  owner: iuc
  revisions: eded025438db
  tool_panel_section_label: RAD-seq
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: stacks_refmap
  owner: iuc
  revisions: d7a482f44e08
  tool_panel_section_label: RAD-seq
  tool_shed_url: https://toolshed.g2.bx.psu.edu/
- name: regex_replace
  owner: kellrott
  revisions: 9a77d5fca67c
  tool_panel_section_label: Text Manipulation
  tool_shed_url: https://toolshed.g2.bx.psu.edu/

Feedback

4 stars	1

April 2021

• 4 stars: Liked: I liked that it is possible to use real data and explore multiple tools. It was relatively easy to follow all the way to the final step. I could also take the Structure output and run it through Structure in Galaxy or in my own PC to further demonstrate that the SNP data can be analysed with population genomic software. Disliked: Some of the instructions need to be updated to the latest versions of the tools available in Galaxy. I could not tell which population (1 or 2) was the freshwater and which one was the oceanic, so I assumed 1=freshwater, 2=oceanic. It would also be good to see some of the "expected" results, just to verify that what has been done is working fine and that students are on the right track.